Castrol Braycote Micronic 700 is a smooth, buttery, translucent off-white colored, NLGI #2 grease. It uses Castrol Brayco 815Z as the base fluid and a tetrafluoroethylene telomer as the gelling agent. This product was specially formulated to provide exceptional anti-wear properties, in combination with ultra low outgassing and extreme temperature use capabilities. Braycote Micronic 700 exhibits superior chemical resistance, and is non-toxic, nonflammable, chemically inert, and does not use any chlorofluorocarbons (CFC's) during product manufacture. It has excellent lubricating properties, good shear stability, low acute toxicity, and promotes extended rolling element cycle lives. Castrol Fluoroclean™ X100 can be used to remove this lubricant. Refer to the data sheet for Fluoroclean X100 for information regarding this product.
Braycote 296 are smooth, off-white colored perfluoropolyether greases, in NLGI grades 0, 1, and 2. Each Braycote product uses a proprietary base fluid thickened with a special tetrafluoroethylene gelling agent. These products are specially formulated to provide wear protection in most load and speed conditions under high or extreme vacuum conditions. These products offer excellent lubricity, thermal stability, low volatility, good shear stability, low acute toxicity and contain no sodium or other alkali metal containing ingredients. These greases are nonflammable and chemically inert. Castrol Brayco IC X100 can be used to remove these lubricants. Refer to the data sheets for information regarding these products.
Castrol Braycote 803 is a smooth, buttery, translucent-white, NLGI #2, grease, based on perfluoropolyether oil and thickened with a tetrafluoroethylene gelling agent. This product provides excellent lubricity, oxidative and thermal stability, low volatility, good shear stability, low acute toxicity and contain no sodium or other alkali metal containing ingredients. Castrol Fluoroclean™ X100 or Castrol Fluoroclean™ HE can be used to clean this product. Refer to the data sheets for information regarding these products.
Castrol Braycote® 803EP is a smooth, buttery, grayish colored NLGI #2 grease, based on a perfluoropolyether oil (Castrol Brayco® 812) and thickened with a tetrafluoroethylene gelling agent. It also contains an extreme pressure additive. This product is thermally stable in air, vacuum, or in the presence of oxidizers such as oxygen and does not polymerize under these conditions. This grease is designed to operate from below -65ºF to above 500ºF (below -54ºC to above 260ºC) due to its inherently good volatility characteristics. Castrol Braycote® 803EP is compatible with all commonly used construction materials including metals, plastics and elastomers. Castrol Fluoroclean™ X100 or Castrol Fluoroclean ™ HE can be used to clean this product. Refer to the data sheets for information regarding these products.
Castrol Braycote® 803RP is a smooth, buttery, off-white NLGI#2 grease, based on perfluoropolyether oil (Castrol Brayco® 812) and thickened with a tetrafluoroethylene gelling agent. It contains a rust and corrosion inhibitor for ferric component protection. Castrol Braycote® 803RP is thermally stable in air, vacuum, strong acids and oxidizers. Castrol Fluoroclean™ X 100 or Castrol Fluoroclean™ HE can be used to clean this product. Refer to the data sheets for information regarding these products.
